FallTech 7243Y3 Internal Y-Leg Shock Absorbing Lanyard with Rebar Hooks: Tools & Home Improvement

Tools & Home Improvement Access the most advanced RSS tools and use them to your advantage.

FallTech 7243Y3 Internal Y-Leg Shock Absorbing Lanyard with Rebar Hooks Feb 27th 2013, 12:19 Category: Tools & Home Improvement Vendor: Y-Leg lanyard for fall arrest and 100 percent tie-off Flame resistant and has a char temperature of over 660 degrees Highly res Product Description : : From the ManufacturerThe Internal Y-Leg Shock Absorbing Lanyard with Rebar Hooks is designed to be used in environments where exposure to heat, chemicals and sharp edges is a concern. It features Y-leg construction and utilizes a 2-inch tubular Nomex sleeve which encases a 7259 Internal SAL. The 6,000 pound tubular polyester webbing inside provides the load-bearing element, while the Nomex sleeve protects the lanyard from slag, chemicals and sharp edges. This lanyard also features three forged double-locking Offset snap hook at the attachment end and a rebar hook at the anchorage end. The Internal shock absorbing lanyard limits arresting forces to 900 pounds or less. This lanyard is flame resistant, has a char temperature of over 660 degrees, and is highly resistant to cuts and abrasion. WrapTech Shock Absorbing Lanyards feature a reinforced-gate carabiner rated at 5,000 pounds in an direction. This connector allows the lanyard to be wrapped around a rated structural member and fastened to itself to form your anchorage connector. It is also ideally suited to horizontal lifeline connections or any application where roll-out or compatibility are a concern. All of our lanyards are designed to meet or exceed applicable OSHA and ANSI standards.

You are receiving this email because you subscribed to this feed at blogtrottr.com. If you no longer wish to receive these emails, you can unsubscribe from this feed, or manage all your subscriptions